Electronics

Board specifications:

• Input voltage: 5V USB or 7-12VDC input jack

• Connector types: MICRO-USB-B or DC connector 5.5x2.1mm

• Microcontroller: ATmega32U4– 8-bit, 16MHz frequency

• Flash memory: 32kb

• EEPROM memory: 1kb

• 2.5kb SRAM memory

• 20 input/output pins: 7 of which are PWM

• 12 analog inputs: A0-A5, and part of the remaining pins, 10-bit ADC

• Maximum allowable current on input/output pin: 20mA

• Chip for USB communication: built into the microcontroller, USB 2.0

• Communication speed: up to 12Mbit/s

• Dimensions: 73mm x 54mm x 17mm

• Weight: 0.026 kg

Technical specifications:

Model: LW26-63/3

Type: Rotary switch

Rated current: 63A

Poles: 3 (3-phase)

Voltage: up to 690V

Positions: 0-1-2

Mounting: Panel

Material: High temperature and load resistant

Standard: IEC 60947-3

Weight: 0.450 kg.

Model: DDMPG Handwheel (Digital Dream)

Type: CNC Handwheel / MPG (Manual Pulse Generator)

Axis control: up to 6 axes

Material: housing — plastic / standard for MPG

Compatibility: CNC controllers with MPG / pulse input

Mounting: Panel/machine

Dimensions: 270 x 130 x 130 mm

Weight: 0.700 kg.

Board specifications:

• Input voltage: 5V USB or 7-12VDC input jack

• Connector types: USB-B or DC connector 5.5x2.1mm

• Microcontroller: ATmega2560 – 8-bit, 16MHz frequency

• Programmable flash memory: 256kb

• EEPROM memory: 1kb

• SRAM memory : 8kb

• Analog inputs: 16 units, 10-bit ADC

• Digital input/output pins: 54 (14 of which are with PWM)

• UART ports: 4 hardware serial ports, 1 of which is connected to a chip for USB communication

• Maximum allowable current on input/output pin: 20mA

• Chip for USB communication : Atmega16U2, programmed as USB to Serial

• Buttons: RESET button for easy restart

• Dimensions: 73mm x 54mm x 17mm

• Weight: 0.026 kg

Sensor specifications:

• Supply voltage: 5V
• Rated current: 150mA
• Measurement range: 300-10000ppm
• Operating temperature: -10 - +50 °C
• Dimensions: 40mm x 21mm
• Mounting holes: 2mm

Sensor specifications:

• Supply voltage: 2.5V to 5V

• Nominal current: 170mA

• Maximum current: 600mA (at startup)

• Measurement range: 0.05mg/l – 10mg/l alcohol

• Operating temperature: from -10 to +50 °C

• Dimensions: 40mm x 21mm

• Mounting holes: 2mm

Sensor specifications:

• Supply voltage: 5V

• Rated current: 150mA

• Measurement range: 300-10000ppm

• Operating temperature: -10 - +50 °C

• Dimensions: 40mm x 21mm

• Mounting holes: 2mm

Technical specifications:

Model: YMZ12-32

Type: packaged (rotary cam switch)

Rated current: 32A

Rated voltage: up to 690V

Poles: 3

Positions: various configurations (0-1-2)

Switching angle: ~45°

Mechanical life: ~60,000 cycles

Contacts: silver (for better conductivity)

Mounting: panel (enclosure)

Material: heat-resistant plastic

Weight: 0.280 kg.

Technical specifications:

Model: HZ5-10/1.7

Type: Rotary switch (Cam switch)

Rated voltage: 380 V

Rated current: 10 A

Power: up to 1.7 kW

Standard: IEC 60947-3

Number of positions: 2

Number of contacts: 12 (numbered terminals)

Mounting: Panel

Material: High-quality heat-resistant plastic

Handle colour: Green

Panel size: 60 × 60 mm

Weight: 0.180 kg.

Technical specifications:

Brand: MOTEE

Model: UXK45

Type: Photoelectric slot sensor

Slot width: 5 mm

Light source: Infrared LED 940 nm

Supply voltage: 5–24 VDC

Output: NPN Open Collector, NC and NO

Repeatability: ≤ 0.03 mm

Minimum object: ≥ 0.8 × 1.2 mm

Switching frequency: up to 3 kHz

Cable length: 2 m

Mounting: Screw mounting

Weight: 0.035 kg.

Technical specifications:

Brand: MOTEE

Model: UXY45P

Type: Photoelectric slot sensor

Output: PNP Open Collector

Slot width: 5 mm

Supply voltage: 5-24 VDC

Light source: Infrared LED (940 nm)

Minimum detectable object: ≥ 0.8 × 1.2 mm

Repeatability: ≤ 0.03 mm

Switching frequency: up to 3000 Hz

Cable length: 2 m

Mounting: Screw mounting

Application: Industrial automation

Weight: 0.035 kg

Technical specifications:

- Model: E3F-20P1-20L

- Sensor type: Photoelectric, barrier type (Emitter/Receiver)

- Output type: PNP, 3-wire

- Output function: Normally Open (NO)

- Supply voltage: DC 6–36V

- Maximum output current: 300 mA

- Detection distance: up to 20 metres

- Housing diameter: M12

- Material: Metal (stainless steel)

- Cable length: 1.5 metres

- Operating temperature: -25°C to +55°C

- Protection rating: IP65

Wiring:

• Brown – +V

• Blue – GND

• Black – signal

Technical specifications:

- Model: E3F-20P2-20L

- Sensor type: Photoelectric, barrier type (Emitter/Receiver)

- Output type: PNP, 3-wire

- Output function: Normally Closed (NC)

- Supply voltage: DC 6–36V

- Maximum output current: 300 mA

- Detection distance: up to 20 meters

- Housing diameter: M12

- Material: Metal (stainless steel)

- Cable length: 1.5 meters

- Operating temperature: -25°C to +55°C

- Protection rating: IP65

Wiring:

• Brown – +V

• Blue – GND

• Black – signal

Technical specifications:

Model: E3F-DS30P1

Sensor type: Photoelectric, diffuse (reflective) detection

Output: PNP, 3-wire, normally open (NO)

Supply voltage: DC 6-36 V

Maximum output/load current: up to ~300 mA

Detection distance: up to ~30 cm (≈300 mm) with opaque object

Response time / switching frequency: response time ≤ ~1.5 ms, frequency ~300 Hz

Housing / mounting: M18 × 1 thread, Ø18 mm housing

Operating temperature: approx. -30 °C to +65 °C (non-condensing)

Protection rating: approx. IP67 (dust/water resistant)

Sensing object: Opaque object – suitable for detecting standard materials.

Weight: 0.065 kg.

Technical specifications:

Model: E3S-GS30P1

Sensor type: Photoelectric, U-type slot ("grooved type")

Output: PNP (sourcing)

Supply voltage: DC 12–24 V (±10%)

Current consumption: ≤ 40 mA (max.)

Signal type: Light-ON / Dark-ON (selectable)

Response time: ≤ 1 ms (max.)

Operating temperature: -25 °C to +55 °C (non-condensing)

Protection rating: IP67 (housing)

Sensing distance/detection: approx. 30 mm with standard object (for GS3 series)

Housing: Metal

Indicators: red LED for light + green stability indicator

Weight: 0.200 kg.