CNC Controllers

The breakout board is designed for use with USB motion controllers and features convenient terminals for connecting wires.

Breakout board for ETH motion card – EXETHMC is a breakout board designed for use with the ETH-MC controller board. Multiple inputs and outputs are brought out via user-friendly screw terminals with a 3.5mm pitch. All inputs/outputs are labelled in accordance with the pins on the controller board, brought out on connectors CON3, CON4, CON5, CON6. Supply voltages V+ (controller board supply voltage), 12V, 5V and VDD (3.3V) are brought out on screw terminals. The board features 3 opto-isolated inputs, 1 opto-isolated output, and an analogue voltage of 0-10V for spindle control.

*Note: The terminals are pre-populated for 16 inputs and 16 outputs, which is more than sufficient for most machines. Optocouplers (package SFH620) are not installed in the sockets, nor is an operational amplifier (package LM358). When installing the operational amplifier and using the 0-10V voltage, it is necessary to adjust the voltage using potentiometer P1.

Supported axes: 6

Interface: USB

Maximum pulse signal frequency: up to ~200 kHz

Supply voltage: 12-32V

MPG (Handwheel) support: Yes

Supported software: Mach3

General-purpose opto-isolated output port: 10 pcs

General-purpose opto-isolated input port: 12 pcs

Spindle port: 0-10V (can also be used as PWM output)

Supply voltage: 12-32V

Motor type: Stepper motors – direction and step control (Pulse/Dir)

Applications: CNC routers, mini mills, engraving machines, automation

Weight: 0.350 kg.

The USB motion connector card is designed for use with USB motion controller. This board has connectors for terminal blocks, which allow easy connection of all 16 digital outputs, 14 digital inputs and one analog input, which are available on the USB-MC motion controller. In this way, it is possible to fully utilise all available resources from the USB-MC motion controller.

Model: EC300 Ethernet CNC Controller

Type: Motion controller / CNC controller

Compatible software: Mach3

Computer communication: Ethernet (LAN)

Supported axes: 3 – 6 axes (X, Y, Z, A, B, C)

Maximum frequency: Up to 300 kHz per axis

Supply voltage: 24 V DC

Supply current: > 1 A

Digital inputs: 12 opto-isolated inputs

Digital outputs: 10 opto-isolated outputs

Spindle control: Analogue output 0–10 V or PWM

Relays: 2 pcs. (for spindle / peripherals)

MPG support: Yes (manual CNC handwheel)

Motor compatibility: Stepper and servo motors

Application: CNC routers, milling machines, engravers, plasma machines

Cooling: Passive

Mounting: In control electrical cabinet

Operating environment: Industrial / hobby

Dimensions: 171 x 106 x 21 mm

Weight: 0.740 kg

High performance CNC motion controllers based on Ethernet connection is a high-performance motion controller for CNC machines, designed for use with the popular Mach3 CNC control software on Windows XP, Vista, 7, 8, 8.1, and 10 operating systems with 32-bit (x86) and 64-bit (x64) architectures. As an external controller, it offers various improvements compared to using Mach3 software with a parallel port.

The ETH-MC controller, with its built-in 32-bit microcontroller and powerful FPGA chip, handles all real-time tasks requiring precise synchronization. Therefore, the computer processor is less burdened, allowing Mach3 to run on less powerful desktops, laptops, and even tablet computers.

The card has built-in support for THC plasma machines!

USB motion card is a motion controller designed for use with the popular Mach3 CNC software for control in Windows XP, Vista, 7, 8, 8.1 and 10 operating systems with 32-bit (x86) and 64-bit (x64) architecture. As an external controller, it offers various improvements compared to using Mach3 software via a parallel port. USB-MC does not require installation of the Mach3 LPT driver.

The USB-MC motion controller handles all real-time tasks that require precise synchronization. This reduces the load on the computer processor, so Mach3 can now run on less powerful desktops, laptops, and even tablet computers.

The card has built-in support for THC plasma machines!