Screws

The ball screw pair is a mechanical linear drive mechanism that converts rotary motion into linear motion with minimal friction. The threaded shaft provides screw tracks for the ball elements of the bearing assembly, which act as a precision screw. In addition to being able to apply and withstand high loads, they can do so with minimal internal friction. They are manufactured with precise tolerances and are therefore suitable for use in situations where high accuracy and precision are required. The nut mechanism acts as a nut.

Subcategories

Grid
List

There are 17 products.

Sort by:

Showing 1-15 of 17 item(s)

Quick view
Pre-cut SFU 1605 Ball Screws with Machined Ends - SFU16052

€13.80

Diameter (d) – 16 mm

Pitch (s) – 5 mm

Fixed screw processing – 1 piece

Floating screw processing – 1 piece

Dear customers,

please note that the specified screw dimensions refer to the overall length, not the working stroke!
Quick view
SFS 1605 Screw

€25.50

Diameter (d) – 16 mm

Pitch (s) – 5 mm

Maximum length (L) – 4 metres

Fixed thread machining – €12.00 incl. VAT

Floating thread machining – €3.00 incl. VAT

Cutting accuracy: ≤ 1 mm

Screws under 20 cm are not cut!

Dear customers,

please note that screws and nuts are sold separately!

When ordering a screw and nut set, they are delivered assembled.

If you do not wish for us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFS 1620 Screw

€33.00

Diameter (d) – 16 mm

Pitch (s) – 20 mm

Maximum length (L) – 4 metres

Fixed-end screw machining – €12.00 incl. VAT

Floating-end screw machining – €3.00 incl. VAT

Cutting accuracy: ≤ 1 mm

Screws under 20 cm are not cut!

Dear customers,

please note that screws and nuts are sold separately!

When ordering a screw and nut set, they are delivered assembled.

If you do not wish for us to assemble them, please let us know; in this case, responsibility for compliance and correct operation remains entirely yours!
Quick view
SFS 2010 Screw

€30.00

Diameter (d) – 20 mm

Pitch (s) – 10 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 2.145 kg.

Fixed thread machining – €12.00 incl. VAT

Floating thread machining – €3.00 incl. VAT

Cutting accuracy: ≤ 1 mm

Screws under 20 cm are not cut!

Dear customers,

please note that screws and nuts are sold separately!

When ordering a screw and nut set, they are delivered assembled.

If you do not wish for us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 1204 Screw

€18.00

Diameter (d) – 12 mm

Pitch (s) – 4 mm

Maximum length (L) – 3 metres

Approximate weight per 1m - 0.725 kg.

Cutting accuracy: ≤ 1 mm

Fixed thread processing – 12.00 EUR incl. VAT

Floating thread processing – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 1605 Screw

€14.40

Diameter (d) – 16 mm

Pitch (s) – 5 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 1.370 kg.

Cutting accuracy: ≤ 1 mm

Fixed-end screw machining – 12.00 EUR incl. VAT

Floating-end screw machining – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 1610 Screw

€15.00

Diameter (d) – 16 mm

Pitch (s) – 10 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 1.400 kg.

Cutting accuracy: ≤ 1 mm

Fixed thread processing – 12.00 EUR incl. VAT

Floating thread processing – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 1620 Screw

€17.10

Diameter (d) – 16 mm

Pitch (s) – 20 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 1.400 kg.

Cutting accuracy: ≤ 1 mm

Fixed thread processing – 12.00 EUR incl. VAT

Floating thread processing – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 2005 Screw

€17.40

Diameter (d) – 20 mm

Pitch (s) – 5 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 2.145 kg.

Cutting accuracy: ≤ 1 mm

Fixed thread processing – 12.00 EUR incl. VAT

Floating thread processing – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 2010 Screw

€20.40

Diameter (d) – 20 mm

Pitch (s) – 10 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 2.145 kg.

Cutting accuracy: ≤ 1 mm

Fixed thread processing – 12.00 EUR incl. VAT

Floating thread processing – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 2020 Screw

€22.20

Diameter (d) – 20 mm

Pitch (s) – 20 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 2.150 kg.

Cutting accuracy: ≤ 1 mm

Fixed thread processing – 12.00 EUR incl. VAT

Floating thread processing – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 2505 Screw

€24.60

Diameter (d) – 25 mm

Pitch (s) – 5 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 3.500 kg.

Cutting accuracy: ≤ 1 mm

Fixed thread processing – 12.00 EUR incl. VAT

Floating thread processing – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 2510 Screw

€25.20

Diameter (d) – 25 mm

Pitch (s) – 10 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 3.500 kg.

Cutting accuracy: ≤ 1 mm

Fixed thread processing – 12.00 EUR incl. VAT

Floating thread processing – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 2525 Screw

€37.50

Diameter (d) – 25 mm

Pitch (s) – 25 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 3.500 kg.

Cutting accuracy: ≤ 1 mm

Fixed thread processing – 12.00 EUR incl. VAT

Floating thread processing – 3.00 EUR incl. VAT

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!
Quick view
SFU 3205 Screw

€47.40

Diameter (d) – 32 mm

Pitch (s) – 5 mm

Maximum length (L) – 4 metres

Approximate weight per 1m - 5.900 kg.

Cutting accuracy: ≤ 1 mm

We do not offer processing for this screw size!

Screws under 20 cm are not cut!

Dear customers,
please note that screws and nuts are sold separately!
When ordering a screw and nut set, they are delivered assembled.
If you do not wish us to assemble them, please let us know; in this case, responsibility for compatibility and correct operation remains entirely yours!