Electronics

Features:

Compatible with 5V, 3.3 V

Input voltage: 6.5-12V (DC) or USB power supply

Output voltage: 3.3 V, 5V switchable

Maximum output current: < 700 mA

Bidirectional independent control

Can be switched to 0V, 3.3V, 5V

Built-in two sets of 3.3V, 5V DC output pins.

Board specifications:

• Input voltage: 5V on pin VCC or 7-12V on pin RAW
• Connector types: plated through-holes with 2.54mm pitch
• Microcontroller: ATmega328P-AU – 8-bit, 16MHz frequency
• Flash memory: 32kb
• EEPROM memory: 1kb
• 2kb SRAM memory
• 8 analog inputs: A0-A7, 10-bit ADC
• 14 digital input/output pins: 6 of which are PWM
• Maximum allowable current per input/output pin: 20mA
• Chip for USB communication: not present on the board
• Dimensions: 33mm x 18mm
• Weight: 0.026 kg

Technical specifications:

Model: FA 1:2.0-1/1.8 C

Mount type: C-mount

Focal length: 6, 7 – 36, 8, 16, 25, 35, 50 mm

Aperture: F1.2 – F22

Focusing: Manual

Iris control: Manual

Sensor size: up to 2/3"

Minimum focusing distance: approx. 0.3 m

Filter thread: M37 x 0.75 mm

Dimensions: Ø40 × 70 mm

Material: Metal housing

Weight: 150 g

Specifications:

• Input voltage: 3.3V - 5V DC
• Screw terminals
• 2.54mm pin headers
• Over 250 holes available for connecting components
• Power indicator LED
• RESET button
• Operating temperature: -20 - +70 °C
• Dimensions: compatible with Arduino boards
• Mounting: on Arduino board, compatible screw holes available

Pulse extender  is a device for extending rectangular pulses and increasing their amplitude. It consists of a microcontroller board housed in a metal enclosure, convenient for mounting. Connection to the device is made via screw terminals, which are also plug terminals. There are two terminals – input and output. The maximum level of input pulses is 5V. Upon detecting a rising edge of a rectangular pulse, the microcontroller generates another pulse with a defined duration and amplitude. The pulse duration depends on the device settings. It is adjusted using a 4-channel DIP switch located next to the input terminal. There are 4 switches, allowing 16 combinations for the length of the output pulse.

Converter specifications:

• Input voltage: 10V - 60V DC
• Controlled power: 0.1-1200W
• Rated output current: up to 15A
• Maximum output current: 20A
• Standby consumption: 10mA
• PWM operating frequency: 25kHz
• PWM range: 0-100%
• Operating temperature: -40 - +85 °C
• Dimensions: 77x45x29mm
• Mounting holes: four, 3mm

Converter specifications:

• Input voltage: 10V - 55V DC

• Controlled power: 0.1-3000W

• Maximum power:
  • 12V-720W

  • 24V-1440W

  • 36V-2160W

  • 48V-2880W

  • 50V-3000W

• Rated output current: up to 30A

• Maximum output current: 60A

• Standby consumption: 10mA

• PWM operating frequency: 15kHz

• PWM range: 0-100%

• Operating temperature: -40 - +85 °C

• Dimensions: 120x95x28mm

• Mounting holes: four pieces, 3mm, the metal housing also allows vertical mounting

• Driver interfaces: X, Y, Z, E0, E1 – 5 drivers
• Control of 2 MOSFET transistors for heating up to 2 extruders – E0, E1 ,led out to screw terminals
• Control of 1 MOSFET for bed heating, up to 20A, led out to screw terminal
• Cooling: common heatsink for the 3 powerful MOSFET transistors
• Fan outputs: on screw terminal, PWM control, only when using 1 extruder
• Support for 6 endstops: X, Y, Z
• 3 pins for thermistors – T0 ,T1, T2 - 100k NTC

Technical specifications:

Power supply: DC 4.8V – 6.0V

Output signal: 1.5ms ± 0.5ms

Channels: 3CH

Dimensions: approx. 35 × 30 × 15 mm

Weight: 0.010 kg

Board specifications:

• Input voltage: 5V USB or 10-30VDC input jack

• Operating voltage: 3.3V, but pins are 5V logic tolerant

• Connector types: USB-B-MINI or DC connector 5.5x2.1mm

• Microcontroller: LPC1768– 32-bit, 100MHz frequency

• Programmable flash memory: 512 kB

• SRAM memory : 64kb

• Analog inputs: 8 units, 12-bit ADC

• Digital input/output pins: 36 (6 of which are PWM)

• UART ports: 4 hardware serial ports

• LAN: built-in network support

• USB communication: built into the LPC1768 microcontroller

• Maximum allowable current per input/output pin: 20mA

• Buttons: RESET button for easy restart
• Dimensions: 73mm x 54mm x 17mm

Specifications of RF Transmitter XD-FST:

- Supply voltage: 3.5V-12V

- Current consumption: up to 40mA

- Communication speed: up to 10Kbps

- Frequency range: 433MHz

- Radiated power: 10mW

- Transmission range: 20-200m, depends on the supply voltage

- Signal modulation: ASK – Amplitude Shift Keying

- Operating temperature: -40ºC to +85ºC

- Dimensions: 19mm x 19mm

Specifications of RF Receiver XD-RF-5V:

- Supply voltage: 5V

- Current consumption: up to 6mA

- Communication speed: up to 10Kbps

- Frequency range: 433MHz

- Sensitivity: -105dB

- Signal modulation: ASK – Amplitude Shift Keying

- Operating temperature: -40ºC to +85ºC

- Dimensions: 30mm x 14mm

Board specifications:

• Supply voltage: 5V supplied via the pin headers

• Current consumption: 40mA

• Communication protocol: Bluetooth V2.0

• Communication speed: 2.1Mb/s

• Power level: Class 2, +6dBm

• Frequency range: 2.4GHz – 2.48GHz, ISM frequency band

• Receiver sensitivity: -85dBm

• USB communication protocol: USB v1.1/2.0

• Security: Authentication and encryption

• Operating temperature: -20ºC to +55ºC

• Connector types: 2.54mm pin header

• 14 digital input/output pins: 6 of which are PWM

Main features:

- Model: THT-U171

- Input signal: 0–10V DC

- Output signal: 4–20mA DC

- Power supply: 12–24V DC (nominal 24V)

- Isolation: three-way galvanic isolation (input/output/power supply)

- Accuracy: ≤ 0.1% of full scale

- Mounting: standard DIN rail

- Operating temperature: -20°C to +60°C

- Response time: < 1ms

- Low current consumption: < 30mA

- Weight: 0.105 kg.

Board specifications:

• Supply voltage 3.7V – 4.2V.

• Current consumption:
  • sleep mode < 2.0mA

  • idle mode < 7.0mA

  • GSM communication (average current): 350 mA

  • GSM communication (peak current): 2000mA

• Communication interface: UART (up to 2.8V) and AT commands

• Socket for SIM card: microSIM

• Supported frequencies: Quad Band (850 / 950 / 1800 /1900 MHz)

• Antenna connector: IPX

• Operating temperature: -40 to + 85 ° C

• Status indication: LED

• Dimensions: 25mm x 23mm

• Weight: 0.026 kg